A two-component low pressure spray polyurethane spray foam insulation kit is packaged with A-component and B-component cylinders in easy to use, portable box(es).

Common insulation and sealing applications include: Wall Cavities, Rim Joists, Exterior HVAC Ductwork, Ceiling, Floors, underside of Bath Tubs, Server and Clean Rooms. Other applications include mold and asbestos abatement, theatrical set design and cold storage.

• Each II-205 kit is equipped with a 9.5” long hose and the Handi Gun Two-Component dispensing unit and an 8 pack of nozzles (4 fan & 4 cone nozzles).
• The Handi-Gun and nozzles are solvent resistant and can be cleaned with our Handi Foam Polyurethane Cleaner.
• Yields approximately 200 SQ. FT. AT 1 inch thick

For special per pallet pricing, please contact us at (330) 837-7700 or toll free at (877) 837-7780.

For product data sheets, including instructions for use, please see Spray Foam Technical Data page.

Common insulation and sealing applications include: Wall Cavities, Rim Joists, Exterior HVAC Ductwork, Ceiling, Floors, underside of Bath Tubs, Server and Clean Rooms. Other applications include mold and asbestos abatement, theatrical set design and cold storage.

• Each II-605 kit is equipped 15′ long hoseand an 8 pack of nozzles (4 fan & 4 cone nozzles).
• The Handi-Gun and nozzles are solvent resistant and can be cleaned with our Handi Foam Polyurethane Cleaner.
• Yields approximately 605 SQ. FT. AT 1 inch thick (605 BDFT).

For special per pallet pricing, please contact us at (330) 837-7700 or toll free at (877) 837-7780.

For product data sheets, including instructions for use, please see Spray Foam Technical Data page.

Common Insulation and sealing applications include rim joists, band joists, attic critical seals, wall cavities, exterior HVAC ductwork, ceiling, floors, underside of bath tubs.

• Specially formulated for flame retardency and conforms to the requirements of the ASTM E-84 flame and smoke spread requirements to be rated as a Class 1 building material.
• The E-84 Class 1 foam formulation is tack-free in less than 60 seconds, is cuttable in 2-5 minutes and cures within 1 hour.
• Yields approximately 200 square feet at 1 inch thickness (200 Board Ft).
• Two-component low pressure spray polyurethane foams are packaged with an A-component and B-component cylinder.
• Each II-205 kit is equipped with a 9 1/2′ long hose.
• Also included is an 8 pack of nozzles (3 fan & 5 cone nozzles).
• The Handi-Gun and nozzles are solvent resistant and can be cleaned with approved solvents (refer to Handi Foam Polyurethane Cleaner – item # P10083).

Common Insulation and sealing applications include rim joists, band joists, attic critical seals, wall cavities, exterior HVAC ductwork, ceiling, floors, underside of bath tubs.

• Specially formulated for flame retardency and conforms to the requirements of the ASTM E-84 flame and smoke spread requirements to be rated as a Class 1 building material.
• The E-84 Class 1 foam formulation is tack-free in less than 60 seconds, is cuttable in 2-5 minutes and cures within 1 hour.
• Yields approximately 605 square feet at 1 inch thickness (605 Board Ft).
• Two-component low pressure spray polyurethane foams are packaged with an A-component and B-component cylinder.
• Each II-605 kit is equipped with a 15′ long hose.
• Also included is an 8 pack of nozzles (3 fan & 5 cone nozzles).
• The Handi-Gun and nozzles are solvent resistant and can be cleaned with approved solvents (refer to Handi Foam Polyurethane Cleaner – item # P10083).

Common applications include insulating and sealing of voids such as the inside of concrete blocks, mold filling such as log cabin beams, adding structural support to buildings and reducing vibrations.

• Handi-Foam SR is formulated to slowly rise, fill and insulate large enclosed spaces and blind cavities. Designed to be used when filling voids where more engineering controls are needed for optimum performance.
• Slow Rise (SR) also known as pour-in-place foam, is a multi-purpose low pressure polyurethane foam. Handi-Foam SR cures tack free in 60-90 seconds, is cuttable in 5-10 minutes and cures within 1 hour.
• Approximate yield is 13 Cubic feet.
• Handi-Foam Slow Rise products have a free-rise density of 1.75 lb. per cubic foot (28kg per cubic meter) and an in-place density of 2.0 lb per cubic foot (32 kg per cubic meter) and carries an R-value of 6.2 per inch. Optimum chemical temperature must be between 75°-85° F.
• The cured foam can resist heat and cold -200° to +200° F. However, cured foam is not resistant to UV rays (sunlight) unless painted or stained. Cured foam can be trimmed, sanded and/or painted.
• Meets the Coast Guard Specification Requirements for flotation in Title 33 Code of Federal Regulations, Paragraph 183.114 making it available fur use in the marine industry for buoy filling, fishing dock flotation or watercraft support flotation.

For special per pallet pricing, please contact us at (330) 837-7700 or toll free at (877) 837-7780.

Common applications include insulating and sealing of voids such as the inside of concrete blocks, mold filling such as log cabin beams, adding structural support to buildings and reducing vibrations.

• Handi-Foam SR is formulated to slowly rise, fill and insulate large enclosed spaces and blind cavities. Designed to be used when filling voids where more engineering controls are needed for optimum performance.
• Slow Rise (SR) also known as pour-in-place foam, is a multi-purpose low pressure polyurethane foam. Handi-Foam SR cures tack free in 60-90 seconds, is cuttable in 5-10 minutes and cures within 1 hour.
• Approximate yield is 43 Cubic feet.
• Handi-Foam Slow Rise products have a free-rise density of 1.75 lb. per cubic foot (28kg per cubic meter) and an in-place density of 2.0 lb per cubic foot (32 kg per cubic meter) and carries an R-value of 6.2 per inch. Optimum chemical temperature must be between 75°-85° F.
• The cured foam can resist heat and cold -200° to +200° F. However, cured foam is not resistant to UV rays (sunlight) unless painted or stained. Cured foam can be trimmed, sanded and/or painted.
• Meets the Coast Guard Specification Requirements for flotation in Title 33 Code of Federal Regulations, Paragraph 183.114 making it available fur use in the marine industry for buoy filling, fishing dock flotation or watercraft support flotation.

For special per pallet pricing, please contact us at (330) 837-7700 or toll free at (877) 837-7780.

Common applications include insulating and sealing wall cavities and sound deadening of media and play rooms as well as server or clean rooms.

• Handi-Foam Sound Barrier Open Cell Spray Foam Kit is a .50 LB. density spray foam that provides an R-value of 3.5 per inch and is an excellent product for sound deadening and reducing noise levels.
• Approximate yield is 450 square feet at 1 inch thickness (450 board feet).
• The high expansion of the Sound Barrier / Open Cell products easily fills voids and has a quick curing time. Sound Barrier Spray Foam is easy to apply, adheres to almost any building material and conforms to the surrounding area.
• This spray foam achieves an STC (sound transmission class rating) of 35 at three inches thick.
• Each II-450 kit is equipped with a 9.5” long hose and the Handi Gun Two-Component dispensing unit and an 8 pack of nozzles (4 fan & 4 cone nozzles).
• The Handi-Gun and nozzles are solvent resistant and can be cleaned with our Handi Foam Polyurethane Cleaner.

For special per pallet pricing, please contact us at (330) 837-7700.

Common applications include insulating and sealing wall cavities and sound deadening of media and play rooms as well as server or clean rooms.

• Handi-Foam Sound Barrier Open Cell Spray Foam Kit is a .50 LB. density spray foam that provides an R-value of 3.5 per inch and is an excellent product for sound deadening and reducing noise levels.
• Approximate yield is 1350 square feet at 1 inch thickness (1350 board feet).
• The high expansion of the Sound Barrier / Open Cell products easily fills voids and has a quick curing time. Sound Barrier Spray Foam is easy to apply, adheres to almost any building material and conforms to the surrounding area.
• This spray foam achieves an STC (sound transmission class rating) of 35 at three inches thick.
• Each II-1350 kit is equipped with a 15′ long hose and the Handi Gun Two-Component dispensing unit and an 8 pack of nozzles (4 fan & 4 cone nozzles).
• The Handi-Gun and nozzles are solvent resistant and can be cleaned with our Handi Foam Polyurethane Cleaner.

For special per pallet pricing, please contact us at (330) 837-7700.

Handi-Foam Commercial Vehicle is a 1.75 LB. density spray foam and adheres to almost any material and conforms to the surrounding area, making it the ideal solution for commerical vehicle applications. Because this product is a closed cell polyurethane foam, it can also help to reinforce the structure to which it is applied.

• Approximate yield is 205 square feet at 1 inch thickness (205 BDFT).
• It can be used to reduce vibration, thus helping to increase the longevity of the vehicle and its parts.
• developed specifically for use in a vehicle”s undercarriage, engine compartment and frame. This particular formulation is black in color, which allows the foam to blend in with the vehicle instead of noticeably standing out.
• Can also be used to deaden sound, which will help to provide a more comfortable and quiet environment.

Handi-Foam Commercial Vehicle is a 1.75 LB. density spray foam and adheres to almost any material and conforms to the surrounding area, making it the ideal solution for commerical vehicle applications. Because this product is a closed cell polyurethane foam, it can also help to reinforce the structure to which it is applied.

• Approximate yield is 605 square feet at 1 inch thickness (605 BDFT).
• It can be used to reduce vibration, thus helping to increase the longevity of the vehicle and its parts.
• developed specifically for use in a vehicle”s undercarriage, engine compartment and frame. This particular formulation is black in color, which allows the foam to blend in with the vehicle instead of noticeably standing out.
• Can also be used to deaden sound, which will help to provide a more comfortable and quiet environment.

• Approximate yield 145 square ft. at 1 inch thickness (145 BDFT).
• R-value of 6-7 per inch, retaining the roofs insulation value.

This product maintains the roofs” seamless, monolithic seal which prevents air and moisture infiltration.

Handi-Foam Spray Polyurethane Foam Roof Patch is used to repair pin holes, cracks and patch the roof after equipment changes. It  meets commercial roofing codes for compressive strength for polyurethane foam roofs.

• Approximate yield 425 square ft. at 1 inch thickness (425 BDFT).
• R-value of 6-7 per inch, retaining the roofs insulation value.

This product maintains the roofs” seamless, monolithic seal which prevents air and moisture infiltration.

Handi-Foam Spray Polyurethane Foam Roof Patch is used to repair pin holes, cracks and patch the roof after equipment changes. It meets commercial roofing codes for compressive strength for polyurethane foam roofs.

Designed for LARGE construction applications, assembly line filling or any unique application that requires a balance between quality and affordability.
Chemically cured, two-component polyurethane foam systems, packaged in refillable cylinder.

Upgrading the refill dispensing equipment to the Magnum Heated hose provides improved temperature control and extended reach for increased flexibility.

Comes in 4 sizes:

Handi-Foam Professional Refill System 17 – an approximate yield of 1980 BDFT

Handi-Foam Professional Refill System 100 – an approximate yield of 11400 BDFT

The purchase of any refillable foam system/or dispensing equipment requires the completion of The qualification process, which has been developed by the manufacturer, followed by comprehensive product and equipment training.

For more information, contact us at: Ohio calls (330) 837-7700 or toll-free outside of Ohio (877) 837-7780 regarding refill systems, pricing and/or the training process.

MSDS A-Component

MSDS B-Component

Technical Data Sheet

Operating Instructions

Handi Foam E-84 Class 1 FS25 contains flame retardents in order to meet the testing requirements of ASTM E-84, with a flame spread at 25 less and a smoke developed rating of 450 or less. This is a flame resistance rating (the foam is NOT Fire-Proof) and is sometimes referred to as Class 1.

This product comes in 4 sizes:

Handi-Foam E-84 Class 1 Professional Refill System 17: an approximate yield of 1980 BDFT.

Handi-Foam E-84 Class 1 Professional Refill System 100:  an approximate yield of 11,400 BDFT.

The purchase of any refillable foam system/or dispensing equipment requires the completion of The qualification process, which has been developed by the manufacturer, followed by comprehensive product and equipment training.

For  information regarding  our refill systems, pricing and/or the training process, contact us at: Ohio calls (330) 837-7700 or toll-free outside of Ohio (877) 837-7780.

For product data sheets, please click the links below.

MSDS A-Component

MSDS B-Component

Technical Data Sheet

Operating Instructions

Slow Rise (SR) is a multi-purpose polyurethane foam.  Handi-Foam SR cures tack free in 60-90 seconds, is cuttable in 5-10 minutes and cures within 1 hour.  Handi-Foam SR Products have a free-rise density of 1.75 lb. per cubic foot (28kg per cubic meter) and an in-place density of 2.0 lb per cubic foot (32 kg per cubic meter) and carry an R-value of 6.2 per inch.

Optimum chemical temperature must be between 75°-85° F.  The cured foam can resist heat and cold -200° to +200° F.

However, cured foam is not resistant to UV rays (sunlight) unless painted or stained.  Cured foam can be trimmed, sanded and/or painted.

Handi-Foam SR systems meet the Coast Guard Specification Requirements for flotation in Title 33 Code of Federal Regulations, Paragraph 183.114.

Handi-Foam SR is formulated to slowly rise, fill and insulate large enclosed spaces and blind cavities.  However, there are four considerations which will effect mold pressure and how efficiently the mold is filled.  They are application shot time, orientation and bracing, mold size and mold venting.

This product comes in 4 sizes:

Handi-Flow Slow Rise Professional Refill System 150 – an approximate yield of 128 Cubic FT.

Handi-Flow Slow Rise Professional Refill System 950 – an approximate yield of 830 Cubic FT.

The purchase of any refillable foam system/or dispensing equipment requires the completion of The qualification process, which has been developed by the manufacturer, followed by comprehensive product and equipment training.

For more information regarding refill systems, pricing and/or the training process, contact us at: Ohio calls (330) 837-7700 or toll-free outside of Ohio (877) 837-7780.

MSDS A-Component

MSDS B-Component

Technical Data Sheet

Operating Instructions

This 12 oz multi-purpose cleaner dissolves uncured spray foam, attaches to our professional dispensing unit(s) for general equipment maintenance and may be used for general cleaning purposes.

By case only (12 units).

Tyvek personal protective zipper suit with attached hood and boot covers.

Sizing:

Large fits 5’6″ to 5’11″, 155 to 190 lbs.

XL fits 5’5″ to 6’1″, 165 to 210 lbs.

XXL fits 5’10″ to 6’4″, 175 to 250 lbs.

Our full facepiece respirator is a reusable respirator that offers the user comfort and convenience- coupled with cost savings.

The facepiece is made of a theroplastic elatomer with a silicone faceseal, making it remarkably comfortable, soft and lightweight.  It features a large, hard-coated lens that provides the user a wide, unobstructed view.

The low-maintenance design helps minimize time required to maintain the product; just clean as directed between uses.

This product also has additional parts available:

Organic Vapor Cartridges

Protective Faceshield Covers 25/pk 

Organic Vapor Cartridges (2/pack) This item is for use with our 3M Full Face Mask Respirator.

A pack of 25 disposable peel-away faceshield protectors for our Full Face Respirator.

This unit is a 9 1/2' (3 M) Handi-Gun hose assembly.

This unit is a Handi-Gun hose assembly (available for the II-605 Spray Foam Insulation Kits ONLY).

The Cone Nozzles provide a more narrow spray pattern for concentrated passes of spray foam insulation. These nozzles can be used with our Professional Dispensing Equipment or with the Refill Handi Gun Assembly.

Fan nozzles provide a wider, thinner layer of spray foam per pass. These nozzles may be used with the Professional Dispensing Equipment or with the Refill Handi Gun Assembly we offer.

Available in Package of 8 or 50.

This package contains 4 Fan Nozzles and 4 Cone Nozzles. A combination of the two types of nozzles offers more flexibility for the dispensing of the spray foam insulation. These nozzles can be used with our Professional Dispensing Equipment or with the Refill Handi Gun Assembly.