Handi-Foam Quick Cure common insulation and sealing applications include: Wall Cavities, Rim Joists, Exterior HVAC Ductwork, Ceiling, Floors, underside of Bath Tubs, Server and Clean Rooms. Other applications include mold and asbestos abatement, theatrical set design and cold storage.

A two-component low pressure spray polyurethane foam kit is packaged with A-component and B-component cylinders in easy to use, portable box(es).

This product is available in two convenient sizes:

II-205 Handi-Foam Quick Cure Closed Cell Insulation Kit (200 SQ. FT. AT 1 inch thick)- $310

II-605 Handi-Foam Quick Cure Closed Cell Insulation Kit (605 SQ. FT. AT 1 inch thick) – $590

Each II-205 kit is equipped with a 9.5′ long hose (II-605 kit has a 15′ long hose) and the Handi Gun Two-Component dispensing unit and an 8 pack of nozzles (4 fan & 4 cone nozzles). The Handi-Gun and nozzles are solvent resistant and can be cleaned with our Handi Foam Polyurethane Cleaner.

For special per pallet pricing, please contact us at (330) 837-7700 or toll free at (877) 837-7780.

For product data sheets, including istructions for use, please see Spray Foam Technical Data page.

Common Insulation and sealing applications include rim joists, band joists, attic critical seals, wall cavities, exterior HVAC ductwork, ceiling, floors, underside of bath tubs.

Two-component low pressure spray polyurethane foams are packaged with an A-component and B-component cylinder.

Handi-Foam E-84 class 1 Spray Foam has been specially formulated for flame retardency and conforms to the requirements of the ASTM E-84 flame and smoke spread requirements to be rated as a Class 1 building material. The E-84 Class 1 foam formulation is tack-free in less than 60 seconds, is cuttable in 2-5 minutes and cures within 1 hour.

*Each II-205 kit is equipped with a 9 1/2' long hose (II-605 kit is equipped with a 15' long hose) and the Handi Gun Two-Component dispensing unit. Also included is an 8 pack of nozzles (3 fan & 5 cone nozzles). The Handi-Gun and nozzles are solvent resistant and can be cleaned with approved solvents (refer to Handi Foam Polyurethane Cleaner- item # P10083).

This product is available in 2 sizes:

II-605 Handi-Foam E-84 Class 1 Closed Cell Insulation Kit – 605 BD FT ($610)

II-205 Handi-Foam E-84 Class 1 Closed Cell Insulation Kit – 200 BD FT ($335)

Common applications include insulating and sealing of voids such as the inside of concrete blocks, mold filling such as log cabin beams, adding structural support to buildings and reducing vibrations.

Designed to be used when filling voids where more engineering controls are needed for optimum performance.

Slow Rise (SR) also known as pour-in-place foam, is a multi-purpose low pressure polyurethane foam. Handi-Foam SR cures tack free in 60-90 seconds, is cuttable in 5-10 minutes and cures within 1 hour.

Handi-Foam SR Products have a free-rise density of 1.75 lb. per cubic foot (28kg per cubic meter) and an in-place density of 2.0 lb per cubic foot (32 kg per cubic meter) and carries an R-value of 6.2 per inch. Optimum chemical temperature must be between 75°-85° F.

The cured foam can resist heat and cold -200° to +200° F. However, cured foam is not resistant to UV rays (sunlight) unless painted or stained. Cured foam can be trimmed, sanded and/or painted.

Handi-Foam SR systems meet the Coast Guard Specification Requirements for flotation in Title 33 Code of Federal Regulations, Paragraph 183.114 making it available fur use in the marine industry for buoy filling, fishing dock flotation or watercraft support flotation. Handi-Foam SR is formulated to slowly rise, fill and insulate large enclosed spaces and blind cavities.

However, there are some considerations which will effect mold pressure and how efficiently the mold is filled. They are: application shot time, orientation and bracing, mold size and mold venting.

This kit is available in 2 sizes:

2-13 Handi-Flow Slow Rise Closed Cell Insulation Kit (13 Cubic Ft.): $335

2-43 Handi-Flow Slow Rise Closed Cell Insulation Kit (43.7 Cubic Ft.): $610

Common applications include insulating and sealing wall cavities and sound deadening of media and play rooms as well as server or clean rooms.

Our Handi-Foam Sound Barrier Open Cell Spray Foam Kit is a .50 LB. density spray foam that provides an R-value of 3.5 per inch and is an excellent product for sound deadening and reducing noise levels.

The high expansion of the Sound Barrier / Open Cell products easily fills voids and has a quick curing time. Sound Barrier Spray Foam is easy to apply, adheres to almost any building material and conforms to the surrounding area.

This spray foam achieves an STC (sound transmission class rating) of 35 at three inches thick.

This product is available in 2 sizes:

II-450 Handi-Foam Sound Barrier Open Cell Spray Foam Kit – $399

II-1350 Handi-Foam Sound Barrier Open Cell Spray Foam Kit – $869

*Each II-450 kit is equipped with a 9.5′ long hose (II-1350 is equipped with a 15′ long hose) and the Handi Gun Two-Component dispensing unit and an 8 pack of nozzles (4 fan & 4 cone nozzles). The Handi-Gun and nozzles are solvent resistant and can be cleaned with our Handi Foam Polyurethane Cleaner.

For special per pallet pricing, please contact us at (330) 837-7700.

It can be used to reduce vibration, thus helping to increase the longevity of the vehicle and its parts.

Handi-Foam Commercial Vehicle is a 1.75 LB. density spray foam and adheres to almost any material and conforms to the surrounding area, making it the ideal solution for commerical vehicle applications. Because this product is a closed cell polyurethane foam, it can also help to reinforce the structure to which it is applied.

Handi-Foam Commercial Vehicle Spray Foam was developed specifically for use in a vehicle’s undercarriage, engine compartment and frame. This particular formulation is black in color, which allows the foam to blend in with the vehicle instead of noticeably standing out.

The Handi-Foam Commercial Vehicle Spray Foam can also be used to deaden sound, which will help to provide a more comfortable and quiet environment.

Handi-Foam SPF Roof Patch provides an R-value of 6-7 per inch, retaining the roofs insulation value.

This product maintains the roofs’ seamless, monolithic seal which prevents air and moisture infiltration.

Handi-Foam Spray Polyurethane Foam Roof Patch is used to repair pin holes, cracks and patch the roof after equipment changes. It  meets commercial roofing codes for compressive strength for polyurethane foam roofs.

This product is available in 2 sizes:

II-145 Handi-Foam SPF Roof Patch 2.5 lb Closed Cell Kit: $359

II-425 Handi-Foam SPF Roof Patch 2.5 lb Closed Cell Kit: $759